African Journal of
Agricultural Research

  • Abbreviation: Afr. J. Agric. Res.
  • Language: English
  • ISSN: 1991-637X
  • DOI: 10.5897/AJAR
  • Start Year: 2006
  • Published Articles: 6863

Full Length Research Paper

Performance evaluation of a motorized ginger juice expression machine

Onu Olughu Onu
  • Onu Olughu Onu
  • Department of Agricultural and Bioresources Engineering, Michael Okpara University of Agriculture, Umudike, P. M. B. 7267, Umuahia Abia State, Nigeria.
  • Google Scholar
Kayode Joshua Simonyan
  • Kayode Joshua Simonyan
  • Department of Agricultural and Bioresources Engineering, Michael Okpara University of Agriculture, Umudike, P. M. B. 7267, Umuahia Abia State, Nigeria.
  • Google Scholar


  •  Received: 19 May 2015
  •  Accepted: 21 August 2015
  •  Published: 10 September 2015

References

Deli S, Masturah MF, Aris YT, Nadiah WAW (2011). The effects of physical parameters of the screw press oil expeller on oil yield from Nigella sativa L seeds. Int. Food Res. J. 18:1367-1373. ISSN 2231-7546.
 
Endrias G, Asfaw K (2011). Production, processing and marketing of ginger in southern Ethiopia. J. Hortic. For. 3(7):207-213.
 
Evangelista RL, Cermak SC (2007). Full-press oil extraction of Cuphea (PSR23) Seeds. J. Am. Oil Chem. Soc. 84:1169-1175. ISSN 1558-9331.
 
Eze JI, Agbo KE (2011). Comparative studies of sun and solar drying of peeled and unpeeled ginger. Am. J. Sci. Ind. Res. 2(2):136-143.
Crossref
 
Fasina OO, Ajibola OO (1989). Mechanical expression of oil from Conophor nut. J. Agric. Eng. Res. 44:275-287.
Crossref
 
Fellows P (1990). Food processing technology: Principles and Practice. Ellis Harwood, West Sussex, pp. 143-146.
 
Ibrahim A, Onwualu AP (2005). Technologies for extraction of oil from oil-bearing agricultural products: A Review. J. Agric. Eng. Technol. (JAET).13:58-70.
 
Kolawole OP, Agbetoye LAS, Ogunlowo AS, Samuel TM (2012). Effect of speed and back pressure on the performance of screw press in dewatering of cassava mash. Greener J. Sci. Eng. Technol. Res. 2(1):17-23. ISSN: 2276-7835. 
 
Lewis MJ (1990). Physical Properties of Foods and Food Processing Systems. Ellis Harwood Ltd, West Sussex.
Crossref
 
Olaniyan AM (2010). Effect of extraction conditions on the yield and quality of oil from castor bean. J. Cereals Oilseeds 1(2):24-33.
 
Olaniyan AM, Oje K (2011). Development of model equations for selecting optimum parameters for dry process of shea butter extraction. J. Cereals Oilseeds 2(4):47-56.
 
Olaoye JO, Oyelade OA (2012). Synthesis and analysis of a slider crank linkages in sugarcane juice extractor. Glob. J. Pure Appl. Sci. Technol. 2(1):10-26. ISSN 22497188. www.gjpast.com
 
Onu LI, Okafor GI (2002). Effect of physical and chemical factor variations on the efficiency of mechanical slicing of Nigerian ginger (Zingiber officinale rose). J. Food Eng. 56:43-47.
Crossref
 
Onuoha SN, Idike FI, Oduma O (2012). Anthropometry of south eastern Nigeria agricultural workers. Int. J. Eng. Technol. 2(6). E-Journal, ISSN: 2049-3444.
 
Ravindran PN, Nirmal BK (2005). Ginger: The Genus Zingiber. CRC Press, Florida, U.S.A.
 
Tunde-Akintunde TY, Akintunde BO, Igbeka JC (2001). Effects of processing factors on yield and quality of mechanically expressed soybean oil. J. Agric. Eng. Technol. 9:39-45.
 
Singh KK, Wiesenborn DP, Tostenson K, Kangas N (2002). Influence of moisture content and cooking on screw pressing of crambe seed. J. Am. Oil Chem. Soc. 79:165-170, ISSN 1558-9331.
 
Yiljep Y, Fumen G, Ajisegiri E (2005). The effects of peeling, splitting and drying on ginger quality. Agricultural Engineering International: the CIGR Ejournal. 7.