International Journal of
Physical Sciences

  • Abbreviation: Int. J. Phys. Sci.
  • Language: English
  • ISSN: 1992-1950
  • DOI: 10.5897/IJPS
  • Start Year: 2006
  • Published Articles: 2578

Full Length Research Paper

Numerical modeling and determination of parameters characteristic of a photovoltaic module LRAER (FST Nouakchott)

M. M. Menou*
  • M. M. Menou*
  • Applied Research Laboratory for Renewable Energies, LRAER, University of Science and Technology and Medicine, in Nouakchott, Mauritania.
  • Search for this author on:
  • Google Scholar
A. Yahfdhou
  • A. Yahfdhou
  • Applied Research Laboratory for Renewable Energies, LRAER, University of Science and Technology and Medicine, in Nouakchott, Mauritania.
  • Search for this author on:
  • Google Scholar
A. K. Mahmoud
  • A. K. Mahmoud
  • Applied Research Laboratory for Renewable Energies, LRAER, University of Science and Technology and Medicine, in Nouakchott, Mauritania.
  • Search for this author on:
  • Google Scholar
A. M. Yahya
  • A. M. Yahya
  • Applied Research Laboratory for Renewable Energies, LRAER, University of Science and Technology and Medicine, in Nouakchott, Mauritania.
  • Search for this author on:
  • Google Scholar
I. Youm
  • I. Youm
  • Laboratory of Semiconductor and Solar Energy, LASES, Faculty of Science and Technology, University Cheikh Anta Diop, Dakar, Senegal.
  • Search for this author on:
  • Google Scholar


  •  Received: 15 August 2016
  •  Accepted: 11 November 2016
  •  Published: 30 December 2016

Abstract

The main objective of this work is to study, develop and establish an approach through the mathematical model of performance CENERG under the term (MC). This model is used to characterize the parameters of photovoltaic systems in the literature. For this, we have considered the required performance is normally measured in standard test conditions (STC), where an average solar spectrum AM 1.5 is used, sunshine is normalized at 1000 W/m², and the cell temperature is set equal to 25°C. Modeling which is presented based on data provided by the manufacturers of solar cells or panels. The mathematical modeling process is performed with the model (MC) in search of the equations governing the operation of LRAER group photovoltaic panels, to that end, we can determine the parameters of the mathematical model (MC). The work also allows showing accuracies, through the comparison of the simulation results obtained with the actual production data (experimental) to ATERSA 75 W modules of the LRAER USTM.

Key words: PV generator model (GPV), CENERG mathematical model, characteristics I (V), characteristics P(V).

Copyright © 2025 Author(s) retain the copyright of this article.

This article is published under the terms of the Creative Commons Attribution License 4.0

Back to Vol. 11 No. 24
Back to articles
SUBSCRIBE TO RSS
SUBMIT MANUSCRIPT
CONFERENCES