Full Length Research Paper
References
| Anderson EM (1942). The Dynamics of Faulting. Oliver and Boyd, London. P. 183. | ||||
| Amanor JA (1979). The Geology of the Ashanti gold mines with implications for exploration. Unpublished M. Sc. Thesis.University of London. P. 91. | ||||
| Aubertin M, Bussière B, Bernier L (2002). Environnementetgestion des rejetsminiers. Manual onCD-ROM, Presses Internationales Polytechniques. | ||||
| Beauchamp KJ, Cameron AR (1999). Optimizing underground stoping efficiency. In proc. 14th CIM Mine Operators Conference, 21-25 Feb 1999, Bathurst, N.B. P. 8. | ||||
| Clark L, Pakalnis R (1997). An Empirical Design Approach for Estimating Unplanned Dilutionfrom Open Stope Hangingwalls and Footwalls. Presentation at 99th Canadian Institute of Mining annual conference, Vancouver, B.C. | ||||
| Cepuritis PM, Villaescusa E (2006). Comprehensive Back Analysis Techniques for assessing factors affecting Open Stope Performance in the Proceedings of the Asian Rock Mechanics Symposium, Rock mechanics in underground construction; ISRM International Symposium; 4th Asian Rock Mechanics Symposium, Singapore; World Science Pub. Co., Hacken, NJ. P. 45 | ||||
| Cepuritis PM, Villaescusa E, Beck DA, Varden R (2010). Back analysis of over-break in a longhole open stope operation using Non-linear Elasto-Plastic Numerical Modelling; Proceedings of the 44th US Symposium Rock Mechanics and 5th Canada-US Rock Mechanics Symposium, Salt Lake City, UT, ARMA Paper 10-124. P. 11. | ||||
| Connors C, Wheeler L, Forsyth B, Clark L (1996). Determination of blast damage mechanisms in low quality rock masses. CANMET DSS File 02SQ.23440-4-1 046. | ||||
| David M (1988). Dilution and geostatistics, CIM Bull. 81(914):29-35. | ||||
| Davis DW, Hirdes W, Oberthür T, Lüdtke G, Loh G, Konan G (1995). U-Pb age constraints on 2.1 Ga orogeny and gold mineralisation in West Africa. In: Precambrian '95, An International Conference on Tectonics and Metallogeny of early/mid Precambrian orogenic belts Program with abstracts. Montreal. | ||||
| Deere DU (1973). The foliation shear zone - An adverse engineering geologic feature of metamorphic rocks. ASCE, Boston Branch, pp. 163 -176. | ||||
| Deere DU (1979). Applied rock Mechanics – The importance of weak geological features. Proc. 4th Inter. Congr. Rock Mechanics, ISRM, Montreaux, Rotterdam: A.A. Balkema 3:22-24. | ||||
| Dickson KB, Benneh G (1988). "A New Geography of Ghana," Longman Group Ltd., London. | ||||
|
Diederichs MS, Kaiser PK (1999). Tensile strength and abutment relaxation as failure Control mechanisms in underground excavations. Int. J. Rock Mech. Min. Sci. Geomech. Abstracts 36:69-96. Crossref |
||||
| Elbrond J (1994). Economic effects of orelosses and rock dilution. CIM Bull. 87(978):131-134. | ||||
| Farrington JL (1941). Post-Mineralisation Fissuring at Ashanti Mine. Transactions of the Institute of mining and Metallurgy No. 446 | ||||
| Germain P, Hadjigeorgiou J, Lessard JF (1996). On the relationship between stabilityprediction and observed stope overbreak. Rock Mechanics, Aubertin, Hassani and Mitri (eds), 1996 Balkema, Rotterdam, pp. 277-283. ISBN 90 5410 838 x. | ||||
|
Hafner W (1951). Stress distribution and faulting. Bulletin of the Geological Soc. Am. 62:373-398 Crossref |
||||
| Hartman HL (1992). SME Mining Engineering Handbook (Volume 2, Chapter 23.4), Selection Procedure, New York, AIME, pp. 2090-2106. | ||||
| Hoek E, Brown ET (1980a). Underground excavation in rock. Lomdon: The Institution of Mining and Metallurgy. P. 527. | ||||
| Hoek E, Brown ET (1980b). Empirical strength criterion for rock masses. J. Geotech. Eng Div. ASCE 106(GT9):1013-1035. | ||||
| Hoek E, Kaiser PK, Bawden WF (1995). Support of Underground Excavations in Hard Rock. Rotterdam: A. A. Balkema. P. 215 | ||||
| Kaiser PK, Falmagne V, Suorineni FT, Diederichs M, Tannant DD (1997). Incorporation of rock mass relaxation and degradation into empirical stope design. In 99th CIM Annual General Meeting, CIM, Vancouver. P. 15. | ||||
| Laubscher DH (1990). A geomechanics classification system for the rating of rock mass in mine design. J. South Afr. Inst. Min. Metall. 90(10):257-73. | ||||
| Leube A, Hirdes W (1990). The Birimian Supergroup of Ghana : depositional environment, structural development and conceptual model of an early Proterozoic suite. Rep. Arch. BGR Hannover 99(529):260 | ||||
| Liu Q, Lizotte Y, Proulx R (1995). Les causes du dommage au massif rocheaudans lestierslongs trous. 18e SEEQ session d'étudesur les techniques de saut age, Université Laval. 2 - 3 November 1995. P. 17 | ||||
| Mah SGL, Pakalnis RT, Poulin R, Clark LM (1995). Obtaining quality cavity monitoringsurvey data. In Proc. CAMI'95: 3rd Canadian Conference on Computer Applications in the Mineral Industry, Montréal, Québec, Oct 22-25. pp. 400-407. | ||||
|
Marinos P, Hoek E (2001). Estimating the geotechnical properties of heterogeneous rock masses such as flysch. Bull. Eng. Geol. Environ. (IAEG) 60:85-92 Crossref |
||||
|
Martin CD, Chandler NA (1994). The progressive fracture of Lac du Bonnet granite. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 31(6):643-659 Crossref |
||||
| Mathews KE, Hoek DC, Wyllie DC, Stewart SBV (1980). Prediction of stable excavation spans for mining at depths below 1000 metres in hard rock. Report to Canada Centre for Mining and Energy Technology (CANMET), Department of Energy and Resources; DSS File No. 17SQ.23440-0-90210. Ottowa. | ||||
| Melisi JP, Ledru P, Johan V, Marcoux E, Vinchon C (1991). Themetallogenic relationship between Birimian and Tarkwaian gold deposits in Ghana. MeneraliumDeposita 26:228-238 | ||||
| Oberthür T, Vetter U, Mumm AS, Weiser T, Amanor JA, Gyapong WA, Kumi R, Blenkinsop TG (1994). The Ashanti Gold Mine at Obuasi,Ghana: Mineralogical, Geochemical, Stable Isotope and Fluid Inclusion Studies on the Metallogenesis of the deposit. Metallogenesis of selected Gold Deposits in Africa, Hannover, pp. 33 -129. | ||||
| Planeta S, Bourgoin C, Laflamme M (1990). The impact of rock dilution on undergroundmining: operational and financial considerations. In Proc. nnd CIM Annual General Meeting, Ottawa, Ontario, 6-10 May 1990. P. 15. | ||||
| Ryder JA (1988). Excess shear stress in the assessment of geologically hazardous situations. J. South Afr. Inst. Min. Metall. 88(1):27- 39. | ||||
| Scoble MJ, Lizotte M, Paventi M, Mohanty BB (1997). Measurement of blast damage. Min. Eng. Min. Eng. Am. Inst. Min. Metall. Pet. Eng., 44(3):243-250. | ||||
| Scoble MJ, Moss A (1994). Dilution in underground bulk mining: Implications for Production Management, mineraI resource evaluation II, methods and case histories. Geological Soc. Special Publication No. 79:95-108. | ||||
| Sinclair C, Bradshaw NG, Gyapong WA, Miller JFG (1978). The geology of the Ashanti Goldfields. Unpublished geological report, Ashanti Goldfields Corporation (Ghana) Ltd. | ||||
| Suorineni FT (1998). Effect of faults and stress on open stope design. PhD thesis, Geomechanics Research Centre, University of Waterloo: Waterloo, Ontario, Canada. P. 344. | ||||
| Suorineni FT, Tidzi KEN (1990). Geomechanical characteristics of a pulverized infillingmaterial of a shear zone. Proc. Int. Conf. on Rock Joints,Leon, Norway, pp. 317- 321. | ||||
| Tatman CR, (2001). Mining dilution in moderate- to narrow-width deposits. Underground miningmethods: engineering fundamentals and international case studies. Hustrulid, W.A., and Bullock, R.L., (eds), Society for Mining, Metallurgy, and Exploration, Inc., Littleton, Colorado, USA, pp. 615-626. | ||||
| Trevor SM (1991). Dilution control at Hudson Bay Mining and Smelting, FlinFIon Operations.In Proc. 93rd CIM Annual General Meeting, Vancouver, British Columbia. | ||||
| Vallée M, David M, Dagbert M, Desrochers C (1992). Guide to the evaluation of gold deposits; CIM Special Volume 45. ISBN 0-919086-31-4. | ||||
| Villaescusa E (2004). Quantifying open stope performance.In Proceedings of Mass Min 2004. Santiago, Chile. 22-25 August. pp. 96-104. | ||||
| Villaescusa E, Cepuritis PM (2005). "The effects of large scale faults on narrow vein stope stability – A Case Study", in The Proceedings of the 40th Rock Mechanics Symposium, 25-29 June, Alaska ARMA/USRMS 05; Paper 714. | ||||
|
Villaesusa E, Onederra L, Scott E (2004). Blast induced damage and dynamic behaviour of hangingwalls in bench stoping. Fragblast 2004. 8(1) 23-40. Crossref |
||||
| Wang J, Milne D, Yao M, Allen G (2002a). Quantifying the effect of hanging wall undercutting on stope dilution. In Proc. 104th CIM AnnualGeneral Meeting, Vancouver Be. P. 8. | ||||
| Yao X, Allen G, Willett M (1999). Dilution evaluation using Cavity Monitoring System atHBMS - Trout Lake Mine.In Proc. 101 st CIM Annual General Meeting, Calgary, Alberta, P. 10. | ||||
| Yu TR (1980). Ground control at Kidd Creek mine. Underground Rock Engineering, 13th Canadian Rock Mechanics Symposium, Toronto, Ont. 28-29 May 1980. CIM Special Volume 22. | ||||
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0
