Full Length Research Paper
Abstract
The flaky graphites were prepared from lignite. The effects of phosphoric acid ratios and pyrolysis temperatures on flake formation were studied by SEM, TEM and XRD. The results showed that the flaky graphite occurred at a pyrolysis temperature of 600°C with a 1.0:1.0 ratio of carbon to phosphoric acid. The flaky formation was almost completed by pyrolysis at 800°C and with a 1:2.0 ratio of carbon to phosphoric acid. The flaky graphite had a thickness and lateral dimension of about 50 nm and 2 mm.
Key words: Flaky graphite, phosphoric acid, pyrolysis temperature, lignite.
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0